|
Post by Hoppy on Jun 8, 2007 20:28:11 GMT -1
Courtesy of IanWThis is real treat as the feedback provided will show. An opportunity to get you hands on a hand made bespoke Tube fly vice. The tubes are held in collets with allows 3mm of tube to be inserted. Plastic tubes will need a needle or length of piano wire put through them to give rigidity but this is not a critical fit as the tube is gripped in the collet, They are made to fit vice clamps for 10 mm stems but other sizes can be made to suit your clamp. The vices have 2.5mm and 3mm collets which will hold standard tubes, bottlenecks and cotton buds. Here's a photo Some reviews : Dear Ian, I would like to thank you for this excellent vice. It does what is written on the packet and does it very well. I would heartily recommend this vice to anyone seriously tying tubes. Well done Illtyd GriffithsI too can do nothing but praise this superior piece of kit...as Illtyd says,
it does everything very very well.. saving a wealth of frustrations. thanks Ian..SilverinvictaBidding closes 9pm 1st July 2007
|
|
|
Post by cullster on Jun 11, 2007 9:29:56 GMT -1
Right lads , i will start this one off with a bid of £20. I have seen this vice up dazes and it is cracking , a must have for tubes Dai.
|
|
|
Post by Teifi Terrorist on Jun 14, 2007 11:23:57 GMT -1
£25 from me.
|
|
|
Post by wilbert on Jun 14, 2007 15:01:01 GMT -1
I will up the bidding to £40
|
|
Andrew Wren
Sewin Nut
Winter Chalk stream Grayling
Posts: 110
|
Post by Andrew Wren on Jul 3, 2007 14:26:01 GMT -1
£45 ,certainly looks better than my Ugly Indian one
|
|
|
Post by Hoppy on Jul 4, 2007 12:21:26 GMT -1
Bidding closed 1st of July - the Winner is Wilbert at £40.00.
I will email details to IanW and Wilbert.
Well done and thanks for supporting the Fund.
Hoppy
|
|